EVAL-M5-E1B1245N-SIC

CoolSiC™ MOSFET motor drives evaluation board for 7.5 kW

This complete evaluation board includes a 3-phase SiC power module for motor drive applications. In combination with control boards equipped with the M5 32-pin interface connector such as the XMC DriveCard 4400, it features and demonstrates our CoolSiC™ MOSFETs in motor drives.

The evaluation board was developed to support customers during their first steps designing applications with the sixpack power module FS45MR12W1M1_B11 and EiceDRIVER™ 1200 V isolated gate driver 1EDI20H12AH. The module has a rated blocking voltage of 1200 V at a typical on-state resistance of 45 mOhm. It is optimized for motor drive applications with a very high-frequency switching operation.

Summary of Features
- EasyPACK™ 1B 1200 V / 45 mΩ sixpack module with CoolSiC™ MOSFET
- Lead-free terminal plating; RoHS compliant
- Low inductive design
- Integrated NTC temperature sensor
- The evaluation board characteristics are:
- Input voltage 340~480 VAC
- Maximum 7.5 kW motor power output
- On-board EMI filter
- Basic insulation between power and signal part
- Isolated current sensing with Δ∑-ADC
- Isolated sensing of dc-link voltage by Δ∑-ADC
- Thermistor output
- Overload and short-circuit hardware protection
- Overtemperature hardware protection
- All six switches turn off during protection
- Rugged gate driver technology with stability against transient and negative voltage
- Auxiliary power supply with 5 V
- Measurement test points compatible with standard oscilloscope probes
- PCB is 259 mm x 204 mm and has four layers of 35 μm copper each

Benefits
- MADK is optimized to GPD / Servo drives with very high fsw
- Including the Easy 1B with CoolSiC™ MOSFET in sixpack configuration
- Equipped with all assembly groups for sensorless field oriented control (FOC)
- Overtemperature and overcurrent protection as well as short circuit protection

Potential Applications
- Motor control and drives